We’ve had a number of contractors to our house for a number of items from roof tear off & redo, to gutters and corner boards, whole-house carpet replacement and a basement completion. We know the lingo and the big picture but - whether it’s the timing or the unknown - this has been the most frustrating process ever! If you find a nuts & bolts, studs to baseboards and crown-molding to carpet contractor you can trust, consider yourself one of the lucky 10 across the country. The rest of us are stuck in the wild-west and unfortunately left with an article that’s not even worth updating over the past 2+ years.

I have a new home plastic/fiberglass shower stall with a glass door and side panel. Two side are the plastic and it is probably 8' tall. I do not want to enlarge it at all. I want to just replace. It is like an inset that was there when we built the house. Not fancy. It is a white/cream color and I would just like something nicer to replace it. Anyone intrested in the Spring, Texas area.

Once your new materials have arrived, the tearout begins. This involves removing everything from your bathroom right down to the studs. At this point in time, if there are issues with water leaks or mold, they can be addressed. It is at this stage that hidden issues are usually uncovered. Keep in mind that issues can dramatically impact your costs, depending on what is found. For example, mold remediation starts at $500 and water damage can cost as much as $2,700.
Ventilation. Ventilation. Ventilation. Moisture is your bathroom’s greatest enemy. Mold and mildew will make quick work of any renovation you’ve done so be sure to install a vent fan of appropriate CFMs for the square footage of your bathroom. The rough guide is one CFM per square foot for bathrooms of one hundred square feet or smaller. New designs are quieter and more stylish than ever and are a must have for any bathroom remodel.
20% labor price ---out of the question----I'm a Building Contractor, If you are totally remodeling a bathroom, where is the cost for demo of existing???? Demo can easily run an extra 10%- factors: 1) Age of existing---many factors here to adjust price, 2) Accessibility ---Getting materials out of and to the bathroom, and protecting present surroundings of owner. 3) Cost to dispose of debris 4) Where is the Contractor's O & P ???
Interior bathroom demolition costs $1,000 to $2,300. Prices can go higher if you’re removing and moving walls to create a different footprint. For the experienced DIYer, this is a good place to save money by doing it yourself or assisting the contractor. However, demo can get expensive quickly if you take out a load bearing wall, cut electrical lines or break a water pipe. Avoid the risk by hiring a pro.

I acted as general contractor and did all my own demo to remodel my 6x8 bathroom. I hired subs individually to do most of the work - an electrician, a plumber, a drywall guy and a tile guy. I painted the walls and the ceiling. I replaced everything except the cast iron tub. Materials and fixtures cost around $2000 and labor was about $3000. My subs had no problem with me supplying the materials, because I discussed their job scope in advance. This project took 6 months but I did have another full bath to use in the mean time.
Wall and Floor Tile: Ceramic, porcelain and natural stone are popular picks for floor tile in bathrooms. Materials will be the deciding factor here, but natural stone often costs more to install because it is difficult to cut and place. From natural stone and classic ceramic to glass and mosaic styles that mimic natural materials, wall tile options vary.
Bathroom remodels provide 60 to 70 percent resale returns as a home improvement project. However, this project isn’t cheap. It is essential to plan your remodeling ideas ahead of time. Then, hire a remodeling contractor for the job. Ask questions, set realistic expectations, get accurate cost estimates and budgeting from the start. Also spend time learning how to work with a bathroom contractor.
×